When ordering a new machine, you need to know the following parameters to quote and determine the model:

① Shape and size of the object to be pasted

②Labeling position

③Labeling speed

④Labeling accuracy

⑤ Process before and after material labelin

During normal working hours, please contact the customer service engineer of our local branch, or you can directly call the after-sales service phone of Guangzhou headquarters (020-82001745-876). For customers 'inquiries and complaints, we can generally accept responses on the same day; for customers' service requirements that affect production and need to replace spare parts, we will send the parts to the customer or dispatch an engineer to rush to the customer within 24 hours.

Outside working hours, please contact us after-sales service manager Mr. Dong: 13600070191

Because the placement direction of the object, the direction of the labeling machine and the winding direction of the label are interrelated, once the two directions are determined, the other direction cannot be changed. And judging whether the three directions are suitable requires certain expertise. Therefore, the customer is required to provide a label winding diagram to ensure that the three directions are adapted. When not suitable, we can inform the customer in advance to order the correct label, or change the direction of the labeling machine in time when designing and producing. In this way, the actual labeling direction and the actual object label will not be wrong.

Machine vision can be used to detect the effect of labeling and to remove unlabeled products. If the product is inconvenient to be removed, you can choose to stop the alarm when you find that the product is not labeled.

The reason

1. The label feed speed is too fast

2. Pre-bid

3. Pre-bid is too long

4. The labeling speed is not fast enough

Solution

1. Decrease the output speed

2. Move the object's electric eye backwards or increase the delay

3. Decrease the length of the pre-mark out

4. Increase the label speed

The reason

1.Bid out speed is too slow

2. The bidding speed is too fast

3. Pre-bid is not long enough

4. The object's electric eye is too far from the standard end

Solution

Increase the out-of-standard speed

2. Decrease bid speed

3. Adjust the length of the pre-mark out length

4. Move the test object's electric eye back

Generally, the position of the tag's electric eye is incorrect, the tag's electric eye is faulty, or dust blocks the electric eye. Please adjust the position of the tag's electric eye or clean the electric eye.

The machine vision inspection system can be used to detect the printed content (date, batch number), and reject products that are not printed clearly.